Maury River — Rockbridge Baths to Ben Salem: River Level Today — Can You Paddle It?
Verdict · updated Oct 17, 10:00 PM UTC
Good to paddle
Levels are within the typical runnable range for this section.
Estimated range
145 cfs
1.6 ft gauge height
USGS gauge 02021500
Runnable 100 – 2,500 cfs
What this means today
At 145 cfs the Maury River is inside the runnable range but only 45 cfs above the 100 cfs floor, so it is sitting at the shallow end of what this reach runs at. A dry few days would take it under.
Over the last 24 hours it has barely moved, 143 cfs to 145 cfs. Daily means over the past 7 days have run between 15 cfs and 515 cfs, 755% higher at the end of the week than the start.
Paddling Rockbridge Baths to Ben Salem
Maury River at Rockbridge Baths to Ben Salem is a 8-mile Class II run in Virginia — bouncy wave trains and the occasional small rapid. Most paddlers put in at Rockbridge Baths (Rt 39) and take out at Ben Salem Wayside (US 60), a trip that runs about 4 hours at a relaxed pace.
Whether it's worth the drive comes down to flow. This section generally paddles well at 100–2,500 cfs (a conservative estimate — see our methodology). Much below that and the Maury River gets low and bony, so you end up scraping gravel and walking the shallows; well above the top of the range it turns fast, cold and pushy, which is a more serious day than most casual boaters want. We read USGS gauge 02021500 about every 30 minutes and compare the live number to that window, so the verdict at the top of this page reflects conditions right now rather than a monthly average.
Flows here are usually most dependable April–July. Spring can run high after rain or snowmelt, and late summer often drops too low to float well — but the gauge always beats the calendar, so check today's reading before you go.
7-day flow trend
Section facts
- Difficulty
- Class II
- Length
- 8 mi
- Float time
- ~4 hr
- Best months
- April–July
- Put-in
- Rockbridge Baths (Rt 39)
- Take-out
- Ben Salem Wayside (US 60)
Reading USGS gauge 02021500 — MAURY RIVER AT ROCKBRIDGE BATHS, VA ↗ · runnable range is an estimate (see methodology)
FAQ
- What water level is good for paddling Maury River — Rockbridge Baths to Ben Salem?
- This section is generally runnable at 100–2,500 cfs (a conservative estimate — see our methodology). Below that it gets too low and bony; well above the top of the range it becomes pushy and then dangerous. We compare the live USGS reading to that range to produce today's verdict.
- How do I check Maury River levels?
- We read USGS gauge 02021500 — the same public data USGS publishes — about every 30 minutes and compare it to the runnable range for this reach. You can also view the raw gauge yourself at waterdata.usgs.gov.
- Is Maury River — Rockbridge Baths to Ben Salem good for beginners?
- This section is rated Class II. At good levels it suits confident beginners and up, but it can have riffles or small rapids. Scout anything you can't see, and stay off it at high water.
- When is the best time to paddle Maury River here?
- Typically April–July, when flows are most reliable for this section. Spring can run high after rain or snowmelt; late summer can drop too low. Always check today's gauge reading rather than assuming.
- How long does it take to float Maury River — Rockbridge Baths to Ben Salem?
- This reach is about 8 miles, roughly 4 hours at a relaxed pace. Higher water is faster; low water and headwinds are slower. Add time for stops.
Nearby sections
Maury River — Ben Salem to Glasgow
Class II · 9 mi · est. range · 10 mi away
Good to paddle · 439 cfsCowpasture River — Griffith to Iron Gate
Class II · 8 mi · est. range · 20 mi away
Good to paddle · 1,450 cfsJames River — Snowden to Big Island
Class II · 8 mi · est. range · 24 mi away