Allegheny River — Kittanning to Ford City: River Level Today — Can You Paddle It?
Verdict · updated Aug 25, 6:00 PM UTC
Good to paddle
Levels are within the typical runnable range for this section.
Estimated range
11,200 cfs
11.3 ft gauge height
USGS gauge 03036500
Runnable 1,000 – 25,000 cfs
What this means today
At 11,200 cfs the Allegheny River is sitting in the middle of the 1,000 cfs–25,000 cfs range for this reach, with 10,200 cfs of margin to the nearer edge — the most forgiving part of the window on the numbers alone.
Over the last 24 hours it has gone from 13,600 cfs to 11,200 cfs, 18% down. Daily means over the past 7 days have run between 7,790 cfs and 13,200 cfs, 35% higher at the end of the week than the start. The last day and the week as a whole point opposite ways, which usually means a recent rain bump on top of a longer rising trend — worth a second look at the chart before you commit to the drive.
Paddling Kittanning to Ford City
Allegheny River at Kittanning to Ford City is a 6-mile Flatwater float in Pennsylvania — no rapids under normal flows, just moving water and the odd riffle. Most paddlers put in at Kittanning Riverfront, PA and take out at Ford City, PA access, a trip that runs about 2.5 hours at a relaxed pace.
Whether it's worth the drive comes down to flow. This section generally paddles well at 1,000–25,000 cfs (a conservative estimate — see our methodology). Much below that and the Allegheny River gets low and bony, so you end up scraping gravel and walking the shallows; well above the top of the range it turns fast, cold and pushy, which is a more serious day than most casual boaters want. We read USGS gauge 03036500 about every 30 minutes and compare the live number to that window, so the verdict at the top of this page reflects conditions right now rather than a monthly average.
Flows here are usually most dependable April–October. Spring can run high after rain or snowmelt, and late summer often drops too low to float well — but the gauge always beats the calendar, so check today's reading before you go.
7-day flow trend
Section facts
- Difficulty
- Flatwater
- Length
- 6 mi
- Float time
- ~2.5 hr
- Best months
- April–October
- Take-out
- Ford City, PA access ↗
Reading USGS gauge 03036500 — Allegheny River at Kittanning, PA ↗ · runnable range is an estimate (see methodology)
FAQ
- What water level is good for paddling Allegheny River — Kittanning to Ford City?
- This section is generally runnable at 1,000–25,000 cfs (a conservative estimate — see our methodology). Below that it gets too low and bony; well above the top of the range it becomes pushy and then dangerous. We compare the live USGS reading to that range to produce today's verdict.
- How do I check Allegheny River levels?
- We read USGS gauge 03036500 — the same public data USGS publishes — about every 30 minutes and compare it to the runnable range for this reach. You can also view the raw gauge yourself at waterdata.usgs.gov.
- Is Allegheny River — Kittanning to Ford City good for beginners?
- This is a flatwater section — no rapids under normal levels — so it's beginner-friendly when the gauge is in range. High water changes everything: cold, fast water is dangerous for anyone.
- When is the best time to paddle Allegheny River here?
- Typically April–October, when flows are most reliable for this section. Spring can run high after rain or snowmelt; late summer can drop too low. Always check today's gauge reading rather than assuming.
- How long does it take to float Allegheny River — Kittanning to Ford City?
- This reach is about 6 miles, roughly 2.5 hours at a relaxed pace. Higher water is faster; low water and headwinds are slower. Add time for stops.
Nearby sections
Clarion River — Cooksburg to Gravel Lick
Class II · 10 mi · est. range · 40 mi away
Good to paddle · 4,020 cfsAllegheny River — Franklin to Emlenton
Class I · 20 mi · est. range · 43 mi away
Good to paddle · 1,290 cfsFrench Creek — Utica to Franklin
Class I · 7 mi · est. range · 45 mi away