Jacks Fork — Highway 17 to Rymers: River Level Today — Can You Paddle It?
Verdict · updated Aug 27, 5:45 PM UTC
Too low to paddle
Not enough water to float well — expect scraping and walking. Wait for rain or a dam release.
Estimated range
27 cfs
0.6 ft gauge height
USGS gauge 07065200
Runnable 250 – 1,800 cfs
What this means today
At 27 cfs Jacks Fork is 223 cfs short of the 250 cfs this reach needs to float — that is the gap between today's reading and the bottom of the runnable range, not a small margin you can paddle through.
Over the last 24 hours it has barely moved, 27 cfs to 27 cfs. Daily means over the past 7 days have run between 28 cfs and 33 cfs, 15% lower at the end of the week than the start.
Paddling Highway 17 to Rymers
Jacks Fork at Highway 17 to Rymers is a 9.2-mile Class II run in Missouri — bouncy wave trains and the occasional small rapid. Most paddlers put in at Highway 17 and take out at Rymers, a trip that runs about 4 hours at a relaxed pace.
Whether it's worth the drive comes down to flow. This section generally paddles well at 250–1,800 cfs (a conservative estimate — see our methodology). Much below that and Jacks Fork gets low and bony, so you end up scraping gravel and walking the shallows; well above the top of the range it turns fast, cold and pushy, which is a more serious day than most casual boaters want. We read USGS gauge 07065200 about every 30 minutes and compare the live number to that window, so the verdict at the top of this page reflects conditions right now rather than a monthly average.
Flows here are usually most dependable March–June. Spring can run high after rain or snowmelt, and late summer often drops too low to float well — but the gauge always beats the calendar, so check today's reading before you go.
7-day flow trend
Section facts
- Difficulty
- Class II
- Length
- 9.2 mi
- Float time
- ~4 hr
- Best months
- March–June
- Put-in
- Highway 17
- Take-out
- Rymers
Reading USGS gauge 07065200 — Jacks Fork near Mountain View, MO ↗ · runnable range is an estimate (see methodology)
FAQ
- What water level is good for paddling Jacks Fork — Highway 17 to Rymers?
- This section is generally runnable at 250–1,800 cfs (a conservative estimate — see our methodology). Below that it gets too low and bony; well above the top of the range it becomes pushy and then dangerous. We compare the live USGS reading to that range to produce today's verdict.
- How do I check Jacks Fork levels?
- We read USGS gauge 07065200 — the same public data USGS publishes — about every 30 minutes and compare it to the runnable range for this reach. You can also view the raw gauge yourself at waterdata.usgs.gov.
- Is Jacks Fork — Highway 17 to Rymers good for beginners?
- This section is rated Class II. At good levels it suits confident beginners and up, but it can have riffles or small rapids. Scout anything you can't see, and stay off it at high water.
- When is the best time to paddle Jacks Fork here?
- Typically March–June, when flows are most reliable for this section. Spring can run high after rain or snowmelt; late summer can drop too low. Always check today's gauge reading rather than assuming.
- How long does it take to float Jacks Fork — Highway 17 to Rymers?
- This reach is about 9.2 miles, roughly 4 hours at a relaxed pace. Higher water is faster; low water and headwinds are slower. Add time for stops.