What water level is good for paddling Pere Marquette River — Gleason's Landing to Bowman Bridge?

This section is generally runnable at 250–2,500 cfs (a conservative estimate — see our methodology). Below that it gets too low and bony; well above the top of the range it becomes pushy and then dangerous. We compare the live USGS reading to that range to produce today's verdict.

How do I check Pere Marquette River levels?

We read USGS gauge 04122500 — the same public data USGS publishes — about every 30 minutes and compare it to the runnable range for this reach. You can also view the raw gauge yourself at waterdata.usgs.gov.

Is Pere Marquette River — Gleason's Landing to Bowman Bridge good for beginners?

This section is rated Class I. At good levels it suits confident beginners and up, but it can have riffles or small rapids. Scout anything you can't see, and stay off it at high water.

When is the best time to paddle Pere Marquette River here?

Typically May–October, when flows are most reliable for this section. Spring can run high after rain or snowmelt; late summer can drop too low. Always check today's gauge reading rather than assuming.

How long does it take to float Pere Marquette River — Gleason's Landing to Bowman Bridge?

This reach is about 8 miles, roughly 3.5 hours at a relaxed pace. Higher water is faster; low water and headwinds are slower. Add time for stops.

Pere Marquette River — Gleason's Landing to Bowman Bridge: River Level Today — Can You Paddle It?

Class I8 mi · ~3.5 hrPere Marquette RiverMichigan

Verdict · updated Aug 26, 1:00 PM UTC

Good to paddle

Levels are within the typical runnable range for this section.

Estimated range

426 cfs

0.8 ft gauge height

USGS gauge 04122500

Runnable 250 – 2,500 cfs

02502,5002,950

What this means today

At 426 cfs the Pere Marquette River is inside the runnable range but only 176 cfs above the 250 cfs floor, so it is sitting at the shallow end of what this reach runs at. A dry few days would take it under.

Over the last 24 hours it has barely moved, 426 cfs to 426 cfs. Daily means over the past 7 days have run between 426 cfs and 444 cfs, ending roughly where it started.

Paddling Gleason's Landing to Bowman Bridge

Pere Marquette River at Gleason's Landing to Bowman Bridge is a 8-mile Class I run in Michigan — easygoing moving water with light riffles and nothing technical. Most paddlers put in at Gleason's Landing and take out at Bowman Bridge, a trip that runs about 3.5 hours at a relaxed pace.

Whether it's worth the drive comes down to flow. This section generally paddles well at 250–2,500 cfs (a conservative estimate — see our methodology). Much below that and the Pere Marquette River gets low and bony, so you end up scraping gravel and walking the shallows; well above the top of the range it turns fast, cold and pushy, which is a more serious day than most casual boaters want. We read USGS gauge 04122500 about every 30 minutes and compare the live number to that window, so the verdict at the top of this page reflects conditions right now rather than a monthly average.

Flows here are usually most dependable May–October. Spring can run high after rain or snowmelt, and late summer often drops too low to float well — but the gauge always beats the calendar, so check today's reading before you go.

7-day flow trend

Daily mean flow (cfs), past 7 days. Shaded band = runnable range.

Section facts

Difficulty: Class I
Length: 8 mi
Float time: ~3.5 hr
Best months: May–October
Put-in: Gleason's Landing
Take-out: Bowman Bridge

Reading USGS gauge 04122500 — PERE MARQUETTE RIVER AT SCOTTVILLE, MI ↗ · runnable range is an estimate (see methodology)

FAQ

What water level is good for paddling Pere Marquette River — Gleason's Landing to Bowman Bridge?: This section is generally runnable at 250–2,500 cfs (a conservative estimate — see our methodology). Below that it gets too low and bony; well above the top of the range it becomes pushy and then dangerous. We compare the live USGS reading to that range to produce today's verdict.
How do I check Pere Marquette River levels?: We read USGS gauge 04122500 — the same public data USGS publishes — about every 30 minutes and compare it to the runnable range for this reach. You can also view the raw gauge yourself at waterdata.usgs.gov.
Is Pere Marquette River — Gleason's Landing to Bowman Bridge good for beginners?: This section is rated Class I. At good levels it suits confident beginners and up, but it can have riffles or small rapids. Scout anything you can't see, and stay off it at high water.
When is the best time to paddle Pere Marquette River here?: Typically May–October, when flows are most reliable for this section. Spring can run high after rain or snowmelt; late summer can drop too low. Always check today's gauge reading rather than assuming.
How long does it take to float Pere Marquette River — Gleason's Landing to Bowman Bridge?: This reach is about 8 miles, roughly 3.5 hours at a relaxed pace. Higher water is faster; low water and headwinds are slower. Add time for stops.

Nearby sections

Good to paddle · 426 cfs