Flint River — Flushing to Flint (Water Trail): River Level Today — Can You Paddle It?
Verdict · updated Aug 24, 6:00 AM UTC
Good to paddle
Levels are within the typical runnable range for this section.
Estimated range
181 cfs
3.4 ft gauge height
USGS gauge 04148500
Runnable 120 – 1,500 cfs
What this means today
At 181 cfs the Flint River is inside the runnable range but only 61 cfs above the 120 cfs floor, so it is sitting at the shallow end of what this reach runs at. A dry few days would take it under.
Over the last 24 hours it has gone from 371 cfs to 181 cfs, 51% down. Daily means over the past 7 days have run between 92 cfs and 226 cfs, 64% higher at the end of the week than the start. The last day and the week as a whole point opposite ways, which usually means a recent rain bump on top of a longer rising trend — worth a second look at the chart before you commit to the drive.
Paddling Flushing to Flint (Water Trail)
Flint River at Flushing to Flint (Water Trail) is a 8-mile Class I run in Michigan — easygoing moving water with light riffles and nothing technical. Most paddlers put in at Flushing area access and take out at Flint (Water Trail landing), a trip that runs about 4 hours at a relaxed pace.
Whether it's worth the drive comes down to flow. This section generally paddles well at 120–1,500 cfs (a conservative estimate — see our methodology). Much below that and the Flint River gets low and bony, so you end up scraping gravel and walking the shallows; well above the top of the range it turns fast, cold and pushy, which is a more serious day than most casual boaters want. We read USGS gauge 04148500 about every 30 minutes and compare the live number to that window, so the verdict at the top of this page reflects conditions right now rather than a monthly average.
Flows here are usually most dependable May–October. Spring can run high after rain or snowmelt, and late summer often drops too low to float well — but the gauge always beats the calendar, so check today's reading before you go.
7-day flow trend
Section facts
- Difficulty
- Class I
- Length
- 8 mi
- Float time
- ~4 hr
- Best months
- May–October
- Put-in
- Flushing area access
- Take-out
- Flint (Water Trail landing)
Reading USGS gauge 04148500 — FLINT RIVER NEAR FLINT, MI ↗ · runnable range is an estimate (see methodology)
FAQ
- What water level is good for paddling Flint River — Flushing to Flint (Water Trail)?
- This section is generally runnable at 120–1,500 cfs (a conservative estimate — see our methodology). Below that it gets too low and bony; well above the top of the range it becomes pushy and then dangerous. We compare the live USGS reading to that range to produce today's verdict.
- How do I check Flint River levels?
- We read USGS gauge 04148500 — the same public data USGS publishes — about every 30 minutes and compare it to the runnable range for this reach. You can also view the raw gauge yourself at waterdata.usgs.gov.
- Is Flint River — Flushing to Flint (Water Trail) good for beginners?
- This section is rated Class I. At good levels it suits confident beginners and up, but it can have riffles or small rapids. Scout anything you can't see, and stay off it at high water.
- When is the best time to paddle Flint River here?
- Typically May–October, when flows are most reliable for this section. Spring can run high after rain or snowmelt; late summer can drop too low. Always check today's gauge reading rather than assuming.
- How long does it take to float Flint River — Flushing to Flint (Water Trail)?
- This reach is about 8 miles, roughly 4 hours at a relaxed pace. Higher water is faster; low water and headwinds are slower. Add time for stops.